This component serves as an LED driver designed to regulate current and voltage for low-power, constant current lighting systems. It ensures stable operation of compatible LED modules by converting incoming power to meet required performance specifications for the connected load. **Electrical Specifications** Input Voltage: 220–240 V AC – supports standard mains power in residential/commercial setups. Output Current: Configurable between 100 mA and 350 mA depending on module requirements. Output stability ensured within defined conditions. Power Factor: High efficiency, >0.9 under full load conditions with minimal reactive losses. **Compatibility Parameters** Load Type: Intended exclusively for LED fittings requiring constant-current regulation – does not support dimmable or variable-power fixtures without external adaptors. Ambient Operating Range: Designed for use within a temperature range of -20°C to +45°C – installation outside these limits can impair function or longevity. – Maximum permissible load is capped at 10 W total output; exceeding this limit may cause failure, overheating, or shutdown protocols activation. – Class II protection rating applies; must only be used in properly insulated systems. – Non-dimmable design — unsuitable for dynamic brightness control integrations. – IP20 rated; cannot be installed near moisture sources without additional housing provisions.